Iron Man - Sticker | for Quest 2 and Quest

1. Clean the area where the deal will be applied thoroughly with rubbing alcohol/wipe and let dry.
2. Carefully peel the backing paper off the decal. The decal should remain on the transfer tape.
3. Position the decal where you want it using a rigid card, like a credit card or gift card, slowly with pressure, and rub the decal to make it adhere to the surface. Work your way from the center towards the edges, especially on sharp points.
4. Slowly peel away the transfer tape at a low angle. Do this slowly to ensure the decal remains on the surface and releases from the transfer tape. If there are issues, place the decal and type down, go back to step 3

* If necessary, pop air bubbles with a sharp pin or needle then press to remove air